how do i go about connecting the door lock wires from an aftermarket alarm to a 96 chevy cavalier (not keyless entry model)?
Here ya go. Make sure you read the bottom.
Chevrolet | Cavalier | 1996-1999 |
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | YELLOW | IGNITION SWITCH HARNESS ** |
Ignition #1: | | PINK | IGNITION SWITCH HARNESS |
Ignition #2: | | WHITE | IGNITION SWITCH HARNESS |
Ignition #3: | | N/A | |
Accessory: | | ORANGE | IGNITION SWITCH HARNESS |
Brake Light: | | WHITE (+) | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | WHITE | AT POWERTRAIN CONTROL MODULE * |
Parking Lights: | | BROWN (+) | AT HEADLIGHT SWITCH |
Headlights: | | D BLUE (LO) | (-) AT HEADLIGHT SWITCH |
OEM Alarm Disarm: | | N/A | IN SCHEMATICS |
OEM Alarm Arm: | | N/A | NO OEM ALARM PRESENT |
Diesel Glow Plug: | | | |
Clutch Bypass Wire: | | | |
Notes: | | * 2.4L Engine Tach Wire Is WHITE At Powertrain Control Module (PCM). 2.2L Engine Tach Wire Is WHITE At PCM. ** This vehicle is equipped with GM's PASSLOCK Anti-Theft system. See Note #113 - General Motors PASSLOCK Bypass Diagram. |
Chevrolet | Cavalier | 1996-1999 |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | RED (2) | IGNITION SWITCH HARNESS |
Starter Kill: | | YELLOW | IGNITION SWITCH HARNESS ** |
Ignition +12 Volts: | | PINK | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | L GRN/BLK & L BLUE (-) | AT CONVENIENCE CENTER MODULE *** |
OEM Horn: | | BLACK (-) | STEERING COLUMN HARNESS |
Power Lock: | | L BLUE | PASSENGER KICK PANEL |
Power Unlock: | | WHITE | MUST TEST WITH PASSENGER SWITCH**** |
Trunk Release: | | BLACK/ WHITE (+) | AT OEM KEYLESS MODULE |
Alarm Input Wire: | | L GRN/BLK & L BLUE (-) | AT CONVENIENCE CENTER MODULE *** |
Notes: | | *** L GREEN/ BLACK (-) Covers Driver Door Only, L BLUE (-) Covers All Other Doors, Diode Isolation Needed Cathode (Band) Side Of Diode Faces Oem Wires. Conv. Center Module Located Behind Driver Dash To Left Of Steering Column. Alternatively, connect the alarm input to the domelight in the roof. **** Without OEM Keyless, See Note # 203 - Reverse Polarity Door Lock Diagram. With OEM Keyless, See Note #202 - Positive Pulse Door Lock Diagram. |