2000 f-150 alarl/rs question

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41254
Printed Date: May 12, 2024 at 12:26 PM

Topic: 2000 f-150 alarl/rs question

Posted By: sahall32
Subject: 2000 f-150 alarl/rs question
Date Posted: October 19, 2004 at 7:20 PM

Every wire chart that I have is telling me that this truck has 3 ignition wires and 2 accessory wires. Are they all needed for the remote start installation?

Replies:

Posted By: SoundFX411
Date Posted: October 19, 2004 at 8:40 PM

the 3rd ignition wire is lt.blue/pink.use this wire if your truck has rear anti-lock brakes. If the truck has anti-lock brakes on all wheels, this wire is not there. Power up the wire if it is there.

hope this helps

Posted By: mo12v
Date Posted: October 19, 2004 at 9:38 PM

Ignition Switch Layout: Ignition #1 - D BLUE/L GREEN..........Powers Ignition Coil (Primary Ignition) Ignition #2 - GRAY / YELLOW.............Powers Blower Motor. Ignition #3 - L BLUE/PINK.............Powers Rear ABS Module. * Ignition #4 - RED / L BLUE..............Powers Heat/Ac Controls. ** Accessory - BLACK/ L GREEN.............Powers Radio & Windshield Wipers. * Wire Not Needed With 4 Wheel ABS. (Wires Present But Have No Function) ** RED / L BLUE Wire In Some Vehicles Is Found As RED / BLACK.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.