2004 DURANGO DISARM

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43352
Printed Date: July 06, 2025 at 7:24 PM

Topic: 2004 DURANGO DISARM

Posted By: autofx
Subject: 2004 DURANGO DISARM
Date Posted: November 19, 2004 at 5:40 PM

Has anyone figured out how to disarm the factory alarm. When I use the aftermarket alarm to arm the system, the factory alarm senses the door locking and arms the factory alarm. I wish I had access to DEI tech, or Alldata. If anyone has any ideas, or even guesses, I'd love to hear them.

Thanks, Danny@Auto F/X

Replies:

Posted By: NowYaKnow
Date Posted: November 19, 2004 at 5:48 PM

Posted By: NowYaKnow
Date Posted: November 19, 2004 at 5:56 PM

Your other options are to sell them a stand alone remote start that doesn't have keyless, an OEM add-on remote start system, OR hack up the factory key and solder wires onto the keyless circuit board inside the key for unlock. Use a relay that activates when you hit unlock, which would cause 87 & 30 to be common and activate the unlock on the factory keyless. Your basically just simulating pushing a button. Only issue is when the battery in the OEM key dies they will need for it to be replaced.. Good luck,

Mike

Posted By: BAXTER1222
Date Posted: November 20, 2004 at 12:18 AM

TRY DOUBLE PULSING YOUR UNLOCK OUTPUT FROM THE ALARM

-------------
BAX