01 ford super duty diesel crew cab wiring

I'm looking for a wiring diagram for a 01 ford super duty diesel crew cab. Any help would be great. I'm installing a crimestopper CS2016 FM remote start car alarms.

Thanks

Dennis

-------------
Dennis Z

01 Ford Superduty



12volts yellow & lt. GREEN/ purple   +   ignition harness
Starter RED / lt. blue   +   ignition harness
Ignition RED / black (larger of 2)   +   ignition harness
Accessory BLACK/ lt. green   +   ignition harness
Second Accessory gray / YELLOW   +   ignition harness
Keysense BLACK/ pink   -   ignition harness
Power Lock pink / YELLOW       
Notes: Non-keyless versions are 5 wire located in the driver door harness. Keyless versions are negative trigger located in a gray molex plug to the right side of the steering column.
Power Unlock pink/lt. green       
Notes: Non-keyless versions are 5 wire located in the driver door harness. Keyless versions are negative trigger located in a gray molex plug to the right side of the steering column.
Parking Lights+ brown   +   headlight switch
Reverse Light BLACK/ pink   +   relay box under hood
Door Trigger BLACK/ lt. blue   +   gray plug right of column
Trunk/Hatch Release N/A       
Tachometer WHITE/ pink   ac   instrument cluster or PCM
Notes: Can also be located in the main harness that runs on the inside of the firewall to the left of the brake pedal.
Wait to start BLACK/ pink   -   instrument cluster or PCM
Notes: This wire MUST be diode isolated from the instrument cluster to keep the battery from draining, see DirectFax document 1090.

Can also be located in the main harness that runs on the inside of the firewall to the left of the brake pedal.
Brake Wire lt. green   +   brake pedal switch
Horn Trigger dk. blue   -   steering column



-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.