2001 LX470 wiring diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47486
Printed Date: May 06, 2025 at 11:03 AM

Topic: 2001 LX470 wiring diagram

Posted By: vektron
Subject: 2001 LX470 wiring diagram
Date Posted: January 11, 2005 at 9:13 PM

I'm looking for a wiring diagram for the 2001 LX470 with Mark Levinson - I am planning on installing a Compustar 2w900fm-as and I want to get as much help as I can.

This will be my first full alarm/remote start install.

Thanks in advance,

Olayn

Replies:

Posted By: vektron
Date Posted: January 13, 2005 at 10:19 AM

Any body?

I was able to get the wiring for a 1998 and 2000, but I am not sure if i can use it for a 2001.

Thank you.

Posted By: vektron
Date Posted: March 15, 2005 at 12:43 PM

Well I was finally able to install this alarm. I had to play with the shock sensor a bit since it kept tripping.

This alarm is really good. I had a Viper 560 before and I think sofar compustart is much better as far as the range and also programing its features.

The only thing left before the install is perfect is the door sensor. I was not able to find the right wire. All the diagrams point to a green wire, but none of them had a negatige input for the doors. I ended up connecting it to the doome light. Not sure if anyone here had ths problem before?

Posted By: Velocity Motors
Date Posted: March 15, 2005 at 1:31 PM

The door pin wire is a LIGHT BLUE found at the steering column and is (-) trigger.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: vektron
Date Posted: March 16, 2005 at 2:56 PM

Great, thanks a lot.

I will try it this weekend, will let you know how it goes.

Posted By: vektron
Date Posted: March 28, 2005 at 2:41 PM

Well, I finally got this to work, I was not able to find the right wire so I just diode isolate the doors.