1994 Suburban 6 speaker system

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49592
Printed Date: May 13, 2024 at 6:23 PM

Topic: 1994 Suburban 6 speaker system

Posted By: chip3446
Subject: 1994 Suburban 6 speaker system
Date Posted: February 07, 2005 at 9:04 PM

I have a 94 Suburban with the factory six-speaker setup. I know there have been a lot of posts on this subject, but I still am having issues. I wired a JVC head unit (PN KD-SHX700) and get power to both the front and rearmost speakers. The second door panel speakers are dead though. I am aware of the factory amp/tuner under the steering wheel (Its in my lap right now), but I don't know which connectors/wires I have to run to it in order for it to work in unison with the new head unit, and to power the middle speakers. Thank ya'll!

Replies:

Posted By: DIGGRC
Date Posted: March 03, 2005 at 8:28 AM

I am having the same problem

I will let you know as soon as I find out. Iam going to try to figure it out this weekend

Posted By: promodeepcycle
Date Posted: March 03, 2005 at 8:42 AM

you have to light up the pink wire in the harness... that is the amp turn-on.....so blue with white to pink........

-------------
dont be a pet monkey ..use your dmm

Posted By: alpine7995
Date Posted: March 08, 2005 at 6:24 PM

or just rewire the burban so that the speakers hook stright up to the headunit