Amp trigger for 2004 Suburban w/bose

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50733
Printed Date: May 15, 2025 at 9:02 AM

Topic: Amp trigger for 2004 Suburban w/bose

Posted By: Spyder_Man
Subject: Amp trigger for 2004 Suburban w/bose
Date Posted: February 23, 2005 at 11:56 PM

I am trying to find the best source for a remote turn-on signal in a 2004 Suburban 2500 with the oem Bose/Delphi 6 disc in-dash changer with XM and the rear video (oem panasonic). The entire factory system is remaining in place and we are only adding a couple of amps for subs. I am using the PAC adapter to get the rca-outs, but I'm not having any luck finding a remote trigger, or even an accy line. If I can't get a true remote/power ant. line, then I would at least like to find an accy line that functions like the radio (stays on after removing the keys until a door is opened). Anyone find a good way to make this work? Thanks in advance.

Replies:

Posted By: Spyder_Man
Date Posted: February 27, 2005 at 8:57 AM

Hmmmm, did I stump everyone here on my first post? C'mon, there's got to be someone here that has done one of these before.....

Posted By: ss-installer
Date Posted: March 02, 2005 at 8:38 PM

i have done aftermarket radios in a couple of these and the acc in the radio plug is the one to tap into. it has the kill delay in its circuit.

-------------

Posted By: cayuga420
Date Posted: March 18, 2005 at 9:56 PM

there is no acc wire at this radio. nor is there a true remote out. drop the dash panel and tap the 10ga brown on the back of the fuse box. pac makes a line out converter that gives a 12v out when it see a signal. either way will work.