1993 Camry Wagon Door Locks

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50775
Printed Date: May 08, 2024 at 7:35 PM

Topic: 1993 Camry Wagon Door Locks

Posted By: zishan
Subject: 1993 Camry Wagon Door Locks
Date Posted: February 24, 2005 at 3:12 PM

I installed a viper 160XV and I am having a problem with connecting the door locks. There is a relay with 5 wire coming out of it, specifically or the door locks. One is #87, two are #87a for the lock and unlock, and two are #30, one for lock and the other for unlock.

i have found the two wires GREEN/ red and blue/white that controla these functions but, i think that they have 12 volts running through them already, so when i press unlock/lock on the remote start, and gives it 12 volt. SO they dont do anything. The locks work on their own, even though these wires are cut? How do I wire this up?

All help welcome. Thank you

Replies:

Posted By: zishan
Date Posted: February 24, 2005 at 3:14 PM

followed this diagram,

posted_image

makes a lot of sense, but still didnt work for me.

Posted By: zishan
Date Posted: February 24, 2005 at 3:17 PM

sorry one last thing, my relay has a small harness with a green and blue wire comeing out of it that plug directly into the brian of the alarm, and then it has five more. with the above description.

Posted By: zishan
Date Posted: February 24, 2005 at 3:47 PM

SUCCESS, okay I tried it like this

and it works! but, if i lock the doors with the interior lock switch and then try and unlock it with the remote it will not unlock.

But, if i press lock on the remote, and then unlock on the remote it does work.

All help apprecited.