2005 tundra pwr lock problems

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51267
Printed Date: May 01, 2025 at 12:25 PM

Topic: 2005 tundra pwr lock problems

Posted By: rnakas
Subject: 2005 tundra pwr lock problems
Date Posted: March 04, 2005 at 3:52 AM

HI,

Has anyone done a 2005 tundra double cab,I'm having problems with the door locks and disabling the factory keyless entry/alarm.I diode isolated the pinswitch ty in's but still having problems.The door lock wire I tapped into at kick panel will only operate drivers door and not the rest.

-------------
rnakas

Replies:

Posted By: gcote
Date Posted: March 05, 2005 at 9:52 AM

this must be done in the driverside door. you need to diode isolate the lock and the lock detect wire with a relay. as well as diode isoltating the unlock wire. you will find the wires at the door ecu on the door switches

-------------
turn us on

Posted By: rnakas
Date Posted: March 05, 2005 at 1:02 PM

does anyone have any color codes or diagrams,also if someone has a copy of DEI's color code sheet for 2005 tundra I would like to get a copy.Much Mahalo's Rick

-------------
rnakas

Print Page | Close Window