Print Page | Close Window

1994 hyundai accent radio wiring diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52974
Printed Date: May 13, 2024 at 10:49 PM


Topic: 1994 hyundai accent radio wiring diagram

Posted By: mumra
Subject: 1994 hyundai accent radio wiring diagram
Date Posted: March 31, 2005 at 11:56 PM

im looking for the diagram for the 94 hyundai accent  radio wires.   Cant seem to find them anywhere .  Any help  would be greatly appreciated.

                              




Replies:

Posted By: Chad7n7
Date Posted: April 01, 2005 at 7:45 AM
Are you trying to install an aftermarket HU?? And is the factory harness already cut??

-------------



Posted By: mumra
Date Posted: April 05, 2005 at 7:13 PM
yeah im gonna put in a aiwa radio for a friend.  The original wiring harness for the stock radio, i just finished reinstalling.  So all i wanna do now is connect the new radio with the adapter so i won thave to cut the wires again.  Cant seem to find one for this 94 accent



Posted By: nam-eci
Date Posted: April 10, 2005 at 1:01 PM

Im from the UK,... are the accents there like ours?

we have to disconnect all the heating controls in the footwell & behind the glove box B4 removing the hyundai center console to get to the factory fitted stereo.

my advise when installing any stereo where the loom has been cut is,find these in order: perm12v? ignition? ground? illumination?

then use a little 9v smoke alarm battery to find all the speakers, hold one wire on to a terminal of the battery and touch each spare wire in turn till a speaker 'pops!' then you have found the circuit, repeat until complete,..if theres a wire remaining and the cars aerial is electric then its possible that is it. any more tape them.

But the best thing to do is get out & Look at the colours of the wires at the speaker terminals. then you know the polarity too!


Print Page | Close Window