Installing Kenwood in jeep?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53042
Printed Date: May 09, 2025 at 6:43 AM

Topic: Installing Kenwood in jeep?

Posted By: sata x
Subject: Installing Kenwood in jeep?
Date Posted: April 02, 2005 at 7:37 AM

I just bought a new kenwood radio for my 95 grand jerokee. I can't get no sound! I think I wired it up right. I bought the jeep from an individual, and the factory one was tore up, missing buttons and nobs. It would come on but I didn'y really no what was what? I think it has a factory amp, so I'm not sure what to do. I have took some wires and just hooked up one of the door speakers and it works fine. I bought the after market harness for it, but I have two wires that is left over, ORANGE / white, and a cream color for mute?

-------------
I don't know, that is why I am here!

Replies:

Posted By: mo12v
Date Posted: April 05, 2005 at 9:48 PM

If you had the Factory Infinity Radio, U need to POWER the Last Wire in the Black Plug. Which should be the BLUE wire on your After Market Harness.

Should be wire for wire (same color) from your Kenwood to your After Market Harness.........If it doesn't come on then check BOTH fuses on Kenwood and BOTH Fuses in Fuse Box........

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: sata x
Date Posted: April 06, 2005 at 8:12 PM

I found out the factory amp was blown! I'll just pick up another one.

-------------
I don't know, that is why I am here!