Print Page | Close Window

99 mustang GT new H/U

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53421
Printed Date: May 14, 2025 at 7:27 AM


Topic: 99 mustang GT new H/U

Posted By: reedtek
Subject: 99 mustang GT new H/U
Date Posted: April 06, 2005 at 7:32 PM

Ok, so I have a new Alpine head unit I installed in my 99 Mustang GT. Used a harness and everything was going fine until I hooked up the left front speaker wires. Once that was connected, I got no sound at all, but if I disconnected it, the other three speakers would work just fine. I am under the impression there is an amp in the factory setup, and I am also presuming the amp is the culprit. This is not a Mach system.

My question is, how many amps does a stock system have for my make/model and where are they located? Also, does that sound like the amp to anyone else or could it be the headunit?

Thanks in advance



Replies:

Posted By: ss-installer
Date Posted: April 06, 2005 at 8:05 PM
have you replaced the door speakers? may be a short in that speaker.

-------------



Posted By: reedtek
Date Posted: April 08, 2005 at 8:59 AM
Yeah, the door speakers are fine


Print Page | Close Window