2000 toyota celica stereo wiring
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54480
Printed Date: May 01, 2025 at 2:20 PM
Topic: 2000 toyota celica stereo wiring
Posted By: jbutler1966
Subject: 2000 toyota celica stereo wiring
Date Posted: April 23, 2005 at 12:02 PM
Replies:
Posted By: thepencil
Date Posted: April 25, 2005 at 9:48 AM
Wiring diagram.
DIRECTWIRE™ WIRING INFORMATION - TOYOTA / CELICA / 2000 / Audio
[PRINT THIS PAGE]
Radio 12v blue / YELLOW + radio
Radio Ground brown - radio
Radio Ignition gray + radio
Radio Illumination green + radio
Factory Amp Turn-on
Power Antenna
LF Speaker +/-
RF Speaker +/-
LR Speaker +/-
RR Speaker +/-
Immobilizer Bypass Module: Required: No Type: N/A Part #: N/A
Notes: N/A
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
-------------
Be careful whose advice you buy, but be patient with those who supply it.
DIRECTWIRE™ WIRING INFORMATION - TOYOTA / CELICA / 2000 / Audio
[PRINT THIS PAGE]
Radio 12v blue / YELLOW + radio
Radio Ground brown - radio
Radio Ignition gray + radio
Radio Illumination green + radio
Factory Amp Turn-on
Power Antenna
LF Speaker +/-
RF Speaker +/-
LR Speaker +/-
RR Speaker +/-
Immobilizer Bypass Module: Required: No Type: N/A Part #: N/A
Notes: N/A
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
-------------
Be careful whose advice you buy, but be patient with those who supply it.