mach 460 system
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5534
Printed Date: August 18, 2025 at 10:17 PM
Topic: mach 460 system
Posted By: rounders2253
Subject: mach 460 system
Date Posted: November 17, 2002 at 2:36 AM
i need the premium sound wiring schematics for the 2000 ford mustang...any help would be appreciated...
-------------
rounders
Replies:
Posted By: esmith69
Date Posted: December 07, 2002 at 6:17 AM
Tried to do one of these (mach 460 system) the other day and boy was it a pain in the butt. I was putting in a subwoofer amp and using a LOC, so I used a speaker popper and found what I thought were the two pairs of wires for the rear speakers, but I forgot that there's component speakers for the rear, and they are crossed over in the factory amp, so that means they have their own set of wires running from the factory amp and I had tapped into the tweeters, thus resulting in a total lack of low frequency sound (even though with the low pass filter turned off, you could hear vocals coming out of the subs). I still haven't figured out which wires are for the rear woofers....any ideas?
Posted By: alansmith54
Date Posted: December 08, 2002 at 5:37 PM
Posted By: ld2638
Date Posted: December 08, 2002 at 10:16 PM
That website is good but a little bit confusing. The rear woofer wires are hiding on the front of the mach cabinet hanging from the rear deck. It may be easiest to
drop that cabinet down. The wire run is very short from the amp output to where it runs inside that cabinet for the rear woofers.
|