Isuzu Rodeo 97-98

any one have a wiring diagram for Isuzu rodeo 97-98 so I can hook up remote starter to it ??

Thank you.

|              12V|WHITE/ black         |+  |ignition harness            |
|          STARTER|BLACK/ white         |+  |ignition harness            |
|         IGNITION|BLACK / YELLOW        |+  |ignition harness            |
|  SECOND IGNITION|BLACK/ red           |+  |ignition harness            |
|        ACCESSORY|blue                |+  |ignition harness            |
|       POWER LOCK|lt. GREEN/ red       |-  |drivers kick panel *2       |
|     POWER UNLOCK|RED / white           |-  |drivers kick panel *2       |
| PARKING LIGHTS +|GREEN/ red           |   |drivers kick panel          |
| PARKING LIGHTS -|GREEN/ YELLOW        |   |steering column             |
|       HEADLIGHTS|RED / blue            |-  |steering column             |
|     DOOR TRIGGER|RED / green           |-  |drivers kick panel          |
|  TRUNK/HATCH PIN|lt. green           |-  |*3                          |
|         HOOD PIN|                    |   |                            |
|TRNK/HTCH RELEASE|gray or RED / blue    |+  |at switch in dash           |
|  FCTRY ALARM ARM|                    |   |                            |
|FCTRY ALRM DISARM|                    |   |                            |
|       TACHOMETER|*1                  |   |*1                          |
|       BRAKE WIRE|red                 |+  |brake switch                |
|     HORN TRIGGER|green or orn/blk    |-  |steering column *4          |
|           WIPERS|                    |   |                            |
|  LF WINDOW UP/DN|brn/wht - blu/red   |A  |in drivers door             |
|  RF WINDOW UP/DN|brn/wht - blu/red   |A  |in R. F. door               |
|  LR WINDOW UP/DN|brn/wht - blu/red   |A  |in L. R. door               |
|  RR WINDOW UP/DN|brn/wht - blu/red   |A  |in R. R. door               |

Notes:
*1 This vehicle has six coils each mounted on top of the spark plugs. The negative side of each coil is a green wire with stripe. GREEN/ black, GREEN / WHITE, GREEN/ orange, solid green, GREEN/ red, GREEN / WHITE. Use one wire and set module to one cylinder setting.  *2 In a white plug in the lower drivers kick. this plug is for a dealer installed alarm and is not connected unless there is an alarm in the vehicle. When metering the wires, have to use the passenger door lock switch.     *3 Behind left rear side panel at the rear wiper diode.    *4 Located in the yellow air-bag wiring harness.  Use caution when working with this harness, and test the wire with a digital multi-meter with a high internal resistance.  Testing the incorrect wire with ANY other testing instrument will deploy the air-bag.

Basic installation. read all the notes prior to installation.

Thanks Jeff.