Print Page | Close Window

Race car ignition issue

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56606
Printed Date: May 13, 2025 at 1:25 PM


Topic: Race car ignition issue

Posted By: themaximus
Subject: Race car ignition issue
Date Posted: May 28, 2005 at 10:37 PM

Hi. I have a 1990 Honda Civic (hatchback) touring race car and I have come to the following dilema. The ignition switch would not start the car so I installed a push start button. Now, what I am trying do is completely eliminate the ignition switch and install a switch panel the among other things will include "ignition" activation. I don't know what are the cables I have to connect to the new "flip" switch.

What I do now is that I turn the key to activate the ignition and then push the start button. If anyone can help me learn what is/are the cable(s) to connect I will really appreciate it.

Thank you,

R



-------------
--Maximus



Replies:

Posted By: themaximus
Date Posted: May 30, 2005 at 2:58 PM

Am I out of topic here?

If not, can someone help me out?

Thank you.



-------------
--Maximus



Posted By: lspker
Date Posted: May 30, 2005 at 10:07 PM
Find the wires under general info wiring.  It's like installing a remote starter.  You'll need ingition, ingintion 1, accessory, maybe another.


Print Page | Close Window