im looking for the wirering diagram for fitting an alarm help in this matter would be helpfull cheers all
-------------
hope to get better
That is the only year I have avaiable for you.
DIRECTWIRE™ WIRING INFORMATION - NISSAN / PULSAR / 1989 / Security
12volts BLACK/ red + ignition harness
Starter BLACK / YELLOW + ignition harness
Ignition BLACK/ white + ignition harness
Power Lock add actuators
Power Unlock add actuators
Lock Motor
Unlock Motor
Disarm Defeat
Parking Lights+ GREEN/ black steering column
Parking Lights-
Hazards
Turn Signal(L)
Turn Signal(R)
Door Trigger yellow/purple - kick panel
Dome Supervision
Trunk/Hatch Pin RED / black - light or sw. in trunk
Hood Pin
Trunk/Hatch Release
Power Sliding Door
Factory Alarm Arm
Factory Alarm Disarm
Disarm No Unlock
Tachometer RED / white AC at instrument cluster
Horn Trigger GREEN/ black - steering column
Memory Seat 1
Memory Seat 2
Memory Seat 3
Interface Module: Category:
Immobilizer Bypass Required:
No Type:
N/A
Part #: N/A
Notes:
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
-------------
Be careful whose advice you buy, but be patient with those who supply it.