Print Page | Close Window

1992 Camaro rs wiring diagram info.

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58415
Printed Date: May 02, 2024 at 2:14 AM


Topic: 1992 Camaro rs wiring diagram info.

Posted By: Shrinktube4.0
Subject: 1992 Camaro rs wiring diagram info.
Date Posted: June 26, 2005 at 10:52 PM

Does anyone have an alarm wiring Diagram for 1992 Camaro rs?




Replies:

Posted By: thepencil
Date Posted: June 26, 2005 at 11:38 PM


DIRECTWIRE™ WIRING INFORMATION - CHEVROLET / CAMARO / 1992 / Security


12volts red    +   ignition harness
Starter yellow    +   ignition harness
Ignition pink    +   ignition harness
Power Lock lt. blue    +   drivers kick panel
Power Unlock black    +   drivers kick panel
Lock Motor          
Unlock Motor          
Disarm Defeat          
Parking Lights+ brown      switch or rear harness
Parking Lights-          
Hazards          
Turn Signal(L)          
Turn Signal(R)          
Door Trigger white    -   underdash light
Dome Supervision          
Trunk/Hatch Pin BLACK/ orange    -   at cargo light
Notes: Only on models equipped with a cargo light.
Hood Pin          
Trunk/Hatch Release black    +   hatch release relay
Notes: The trunk pop relay is located in the convenience center located to the right of the steering column.
Power Sliding Door          
Factory Alarm Arm          
Factory Alarm Disarm          
Disarm No Unlock          
Tachometer white, PURPLE / white   AC   at coil
Horn Trigger black    -   steering column
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
VATS
Part #: 652T resistor pack
Notes: See DirectFax document 1049 for interface information.



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image




Posted By: Shrinktube4.0
Date Posted: June 26, 2005 at 11:54 PM
Appreciate it, thanks




Posted By: thepencil
Date Posted: June 27, 2005 at 8:50 AM
You are welcome.

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image





Print Page | Close Window