AIR BAG

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6033
Printed Date: June 08, 2024 at 1:53 PM

Topic: AIR BAG

Posted By: DEAD EYE
Subject: AIR BAG
Date Posted: November 29, 2002 at 5:26 PM

I have a 1996 ford probe gt.The air bag's were stolen from the car, the problem is that the air bag light stays on all the time. i know i can remove the bulb but i don't want to do that. There must be a resistor i can install into the plug were the air bag was atttached. how does the system know if the air bag is hooked up or not? does it sence the resistence on the line if it does then a resistor can be installed.

-------------
life is to short so live it to the fullest.

Replies:

Posted By: djfearny2
Date Posted: November 29, 2002 at 7:21 PM

there should be a fuse for the air bags either one for the light alone or one for both just take that out i mean it sounds like youdont have any , anyways so it would not make a difference.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Posted By: securinu
Date Posted: December 01, 2002 at 11:10 PM

actually you should probably replace them you will need them when you least expect it.

Print Page | Close Window