Door Trigger Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6106
Printed Date: July 14, 2025 at 6:44 AM

Topic: Door Trigger Wiring

Posted By: Marreio
Subject: Door Trigger Wiring
Date Posted: December 01, 2002 at 2:48 PM

Installing a alarm system in a Honda Civic 2002 sedan. there are three door trigger wires in the car, one for the driver, passenger and one for the rear doors, do I connect all of these wires to the one wire from the alarm control module.

-------------
Marreio

Replies:

Posted By: Velocity Motors
Date Posted: December 01, 2002 at 4:12 PM

Yes that is correct and you will need to diode isolate them as well with a 1N4001 1 amp diode with the cathode band facing the door trigger.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: securinu
Date Posted: December 01, 2002 at 11:08 PM

they should all be in the green alarm connector in the driver kickpanel

Print Page | Close Window