Im installing a compustar 2wss-as alarm system in this particular car. Never installed in a VW before, having LOTS of trouble. I got the wiring diagram, but only about 5 of the colors listed where right. Im having trouble trying to find all the sensing wires, and how to connect the unlock wire. Also anyone have a diagram on how to diode isolate each door, (it has a dome light delay). any help will be greatly appreciated, as this car has been one big headache.
Thanks again
-------------
Car audio, the only way to go
This is what I have for the Golf:
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red |+ |ignition harness |
| STARTER|RED / gray |+ |ignition harness |
| IGNITION|black |+ |ignition harness |
| ACCESSORY|BLACK/ red |+ |ignition harness |
| POWER LOCK|yellow/blue |- |drivers door module *1 |
| POWER UNLOCK|GREEN/ red *2 |- |drivers door module *1 |
| LOCK MOTOR|purple / YELLOW | |drivers door module *1 |
| UNLOCK MOTOR|blue / YELLOW | |drivers door module *1 |
| DISARM DEFEAT|pur/yel or blu/yel | |passengers door module *3 |
| PARKING LIGHTS +|gry/red & gry/blk | |drivers kick panel |
| HEADLIGHTS|yellow/red |+ |headlight switch |
| DOOR TRIGGER|blue/gray *4 |- |comfort module *5 |
| DOME SUPERVISION|blue/gray |- |comfort module *5 |
| TRUNK/HATCH PIN|brn/blk or brn/blu |- |hatch light |
| HOOD PIN|BROWN / red |- |comfort module *5 |
|TRNK/HTCH RELEASE|BROWN / black |- |comfort module *5 |
| FCTRY ALARM ARM|arms w/ lock | | |
|FCTRY ALRM DISARM|disarms w/ unlock | | |
| TACHOMETER|GREEN/ stripe | |ignition coil |
| SPEED SENSE| | | |
| BRAKE WIRE|RED / black |+ |drivers kick panel |
| HORN TRIGGER|BLACK / YELLOW |+ |comfort module *5 |
| WIPERS|grn/yel and green |+ |wiper motor
*1 The drivers door module is located in the drivers door. *2 A double pulse will unlock all doors and disarm the factory alarm. *3 The passengers door module is located in the passengers door. *4 This wire will read the dome light delay. The avoid the dome light delay, use the separate door trigger wires and diode isolate each one. They are BROWN / white and are all located in their own door at their own door module. *5 The comfort module is the main control module located under the drivers side of the dash.
Use this diagram for the door trigger isolation: https://www.velocitymotorsport.com/images/install_notes/149.jpg
Use DIAGRAM A
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA