2006 Chevy Sierra Park Lights

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62707
Printed Date: May 07, 2025 at 1:57 AM

Topic: 2006 Chevy Sierra Park Lights

Posted By: ashlar
Subject: 2006 Chevy Sierra Park Lights
Date Posted: September 14, 2005 at 9:51 PM

I have an '06 Chevy Sierra with the new 'auto' parking light control. While directwire doesn't have a diagram for the '06 yet, the '05 info says that the (-) park light should be the GRAY/BLACK wire, which indeed does go from 12v to 0 when the switch is in the 'park lights' position.

However, my TRC ZR-45 doesn't flash the park lights on arm / disarm, even though the internal relay is set to (-) park, and the wire is connected correctly. (Leaving the switch in the 'Auto' position.)

I suppose I could try to find the (+) park wire, but I'd like to not have to pull the alarm to re-jumper it if possible.

Any thoughts?
-Scott

Replies:

Posted By: genehewett
Date Posted: September 14, 2005 at 11:30 PM

The only answer is change it to positive and use the brown wire in kick panel (or lots other places).

Posted By: ashlar
Date Posted: September 15, 2005 at 2:06 PM

Hrmm.. if I remember correctly, the wires on the back of the block beside the kick panel are the wires I'd want.. there are two brown wires for park- one for left, one for right, correct? I'd assume if I want to have all four lights pop with arm / disarm, I'd need to put a couple of diodes inline and tap both of them, agreed?

Thanks,
-Scott