2000 Ford Explorer Driver Door, Neg Trigger
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63000
Printed Date: April 28, 2024 at 1:33 PM
Topic: 2000 Ford Explorer Driver Door, Neg Trigger
Posted By: mcmcomput
Subject: 2000 Ford Explorer Driver Door, Neg Trigger
Date Posted: September 20, 2005 at 9:45 PM
I have installed the 791xv into my 00 Explorer XLT, however I am wiring all the doors independently using diodes, rather than using the dome light for the trigger. I located the other doors and trunk wires. However I can not find the Drivers Door Wire?... Online it says Yellow/Black, however there are 3 yellow/blacks I see once I took the door pannel off, but only 2 exit the bundle which comes from the door. I have tested a few others, but There are ALOT coming out. Anyone have tips or know which wire I am looking for?
Replies:
Posted By: Hornshockey
Date Posted: September 20, 2005 at 10:16 PM
you shouldn't have to remove the door panel to find the door trigger wire. You do have the color right though. It should be in the harness inside the car coming from the driver door.
-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
Posted By: mcmcomput
Date Posted: September 20, 2005 at 11:56 PM
Is there a wire for the Neutral/Park? Online it says RED / blue, but the only one I could find was the 10 gague ignition or starter wire.
Thanks, after double checking I found the driver side door wire.
|