2005 Cavalier alarm/remote start

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66099
Printed Date: April 25, 2024 at 10:05 AM

Topic: 2005 Cavalier alarm/remote start

Posted By: uneek
Subject: 2005 Cavalier alarm/remote start
Date Posted: November 12, 2005 at 6:56 AM

I need a wiring diagram for a 2005 Chevy cavalier please. to Install a car alarm remote start

-------------
just being uneek

Replies:

Posted By: boomer_106
Date Posted: November 12, 2005 at 7:12 AM

Here ya go. Good luck.

Chevrolet \| \| Cavalier \| \| 2005 - 2005

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW (+)
Ignition #1:	PINK (+)	IGNITION SWITCH HARNESS*
Ignition #2:	N/A
Ignition #3:	N/A
Accessory:	ORANGE (+)	IGNITION SWITCH HARNESS
Brake Light:	WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	White or Orange	Ignition control module on top of engine on drivers side
Parking Lights:	BROWN (+)	BCM blue plug
Headlights:
Diesel Glow Plug:	N/A
Clutch Bypass Wire:
Notes:	*This vehicle is equipped with GM's PASSLOCK II Anti-Theft system. Use Universal Alarm Bypass Module part # 2x402 where X can be any number.BCM is located above drivers kick panel
Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	RED	IGNITION SWITCH HARNESS
OEM Alarm Disarm:	DISARMS WHEN VEHICLE IS	STARTED EITHER BY THE KEY OR REMOTELY
OEM Horn:	BLACK (-)	BCM brown plug
Power Lock:	LT. BLUE	BCM purple plug
Power Unlock:	WHITE	BCM purple plug
Trunk Release:	BLACK/ WHITE (+)	BCM blue plug
Alarm Input Wire:	White (-)	BCM brown plug
Notes:	Without OEM Keyless, See Note # 203 - Reverse Polarity Door Lock Diagram. With OEM Keyless, See Note #202 - Positive Pulse Door Lock Diagram. * L GREEN/ BLACK (-) Covers Driver Door Only, L BLUE (-) Covers All Other Doors, Diode Isolation Needed Cath

Posted By: uneek
Date Posted: January 10, 2006 at 3:31 AM

i have a problem. ilive in germany and not knowing but i cut my harnest so now im having problems connecting a radio. i have the piece from crutchfield but i cant figure out how to connect it. on the piece there is a yellow wire red wire black wire and a pink wire. can you tell me where on my factory harnest they belong. thank you alot

-------------
just being uneek

Posted By: uneek
Date Posted: January 10, 2006 at 5:19 AM

ok do you know how to hook a radio up with out harnest. with wires being cut. can u please help me

-------------
just being uneek

Posted By: boomer_106
Date Posted: January 10, 2006 at 9:48 PM

here is the diagram for the 2004 i dont know how close it might be.....

Radio 12v
      orange
      +
      radio harness

Radio Ground      black       -       radio harness
Radio Ignition      (Class 2 Serial Data)
Radio Illumination      gray (dimmer)       +       radio harness
Factory Amp Turn-on      pink       +       radio harness or amplifier
Power Antenna      N/A
LF Speaker +/-      tan - gray       +,-      radio harness
RF Speaker +/-      lt. green - dk. green       +,-      radio harness
LR Speaker +/-      brown - yellow       +,-      radio harness
RR Speaker +/-      dk. blue - lt. blue       +,-      radio harness