2005 Ford Crown Victoria PI, Remote Start Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66318
Printed Date: May 03, 2025 at 7:16 AM

Topic: 2005 Ford Crown Victoria PI, Remote Start Wiring

Posted By: rngr522
Subject: 2005 Ford Crown Victoria PI, Remote Start Wiring
Date Posted: November 15, 2005 at 1:33 PM

Does anyone have wiring info for installing a keyless entry/remote start unit into a 2005 Ford Crown Victoria PI?
Thanks

Replies:

Posted By: mo12v
Date Posted: November 15, 2005 at 1:51 PM

I use the OMEGA:

Ford/Mazda Transponder Interface: Encrypted PATS3 (IB-F3)


Ford/Mazda Transponder Bypass: PATS 3 Encrypted Key (IB-UF2)

Constant 12 volts	LT GREEN/ VIOLET 20AMP	RED 25AMP IGNITION SWITCH HARNESS
Ignition 12 volts	VIOLET/ORANGE	IGNITION SWITCH HARNESS
Starter	DK GREEN	IGNITION SWITCH HARNESS
Dome Light	BLACK/ LT BLUE (+)	IN 16 PIN CONNECTOR IN DRIVER KICK
Trunk Pin Switch	BROWN / WHITE (-)	PIN 5 GRAY 16 PIN CONNECTOR AT LCM*
Parking Lamp	BROWN (+)	PIN 4 BLACK CONNECTOR AT LCM*
Power Lock	PINK / YELLOW	DRIVER KICK PANEL**
Power Unlock	PINK/LIGHT GREEN	DRIVER KICK PANEL**

*LCM (Lighting Control Module) Is Located To The Right Of The Steering Column
**With OEM Keyless Vehicle Is Positive Pulse
With Out Keyless Vehicle Is Reversal Rest At Ground.

Accessories
Window Up	D\WHT/BLK P\TAN/LT BLU D\YEL/LT BLU P\RED / BLK @MAIN SWITCH
Window Down	F / YELLOW F/WHT/YEL R/YEL/ORNG R/YEL\BLK
Ign Key Warn	BLACK/ PINK (-)	IGNITION SWITCH HARNESS
Trunk Release	VIOLET / YELLOW	DRIVER KICK, HARNESS TO REAR
OEM Horn	DARK BLUE (-)	STEERING COLUMN HARNESS
Headlights	RED / BLACK (+)	AT HEADLIGHT SWITCH
OEM Alarm Arm	NOT SHOWN IN SHOP	MANUAL
OEM Alarm Disarm	NOT SHOWN IN SHOP	MANUAL

Reversal Rest At Ground Window Circuit
Reversal Rest At Ground Trunk Release
OEM Security Horn Wire: YELLOW/LIGHT GREEN At Horn Or At Battery Junction Box Harness.

Remote Start
Tach Signal	NOT RED OR RED / GREEN	ANY IGNITION COIL OR INJECTOR
Ignition #2	GRAY / YELLOW	IGNITION SWITCH HARNESS
Ignition #3	WHITE/ LT BLUE	IGNITION SWITCH HARNESS*
Accessory	WHITE/ VIOLET	IGNITION SWITCH HARNESS
Neutral Safety	NOT GROUNDING TYPE
Brake Light	LT GREEN/ RED (+)	AT SWITCH ABOVE BRAKE PEDAL
Reverse Light	BLACK/ PINK (+)	AT REAR LIGHTS
Rear Window Defrost	GRAY/BLUE (-) PIN 12	OF A 22 PIN CONN AT THE LCM*

Immobilizer Bypass
*LCM (Lighting Control Module) Is Located To The Right Of The Steering Column Ignition Input To Keyless: DARK BLUE At Pin 12 Of A 12 Pin Connector In Passegners Kick Panel.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: ccomm911
Date Posted: January 13, 2006 at 12:05 PM

Is there a "plug & play" keyless entry system for a 2006 Crown Vic Police P71 w/o factory keyless entry? What about adding a keypad to a car w/o any factory keyless, and or in conjunction with an afternarket system? Thanks in advance.

-------------
J.R. Carmichael, Jr.

Posted By: mo12v
Date Posted: January 13, 2006 at 1:18 PM

No "Plug & Play"....that I am aware of.......Have to hardwire......even the Ford Parts unit
We use a Door Keypad that is sold by Mito Corp. KE-1601
www.mitocorp.com

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: kc5niy
Date Posted: January 19, 2006 at 10:33 PM

Can anyone tell me what wire (color) and the location of the wire of the vehicle speed sensor for a 2005 CVPI. I am assuming that the connection will be near the pcm.

Thanks

-------------
kc5niy

Posted By: ccomm911
Date Posted: January 21, 2006 at 10:24 AM

The speed sensor wire is gray with a black stripe. Should be in the plug or blunt cut wires under the glove box - a 18 or 20 gauge wire. I am assuming this is for radar sync? Good luck.

-------------
J.R. Carmichael, Jr.