Print Page | Close Window

02 Toyota Avalon, keyless entry wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67421
Printed Date: June 01, 2024 at 1:44 PM


Topic: 02 Toyota Avalon, keyless entry wiring

Posted By: dwegelin
Subject: 02 Toyota Avalon, keyless entry wiring
Date Posted: December 01, 2005 at 5:43 PM

Could someone please post the wiring chart for a 2002 Toyota Avalon XL (it has power windows, power doorlocks).   I am attempting to install an keyless entry in the car so any information I'll need to know about installing in that car is appreciated. Thanks!



Replies:

Posted By: boomer_106
Date Posted: December 01, 2005 at 11:38 PM
Toyota | | Avalon | | 2000 - 2002

Remote Starter Wiring Colors and Notes
FunctionVehicle ColorLocation
Start:BLACK/ WHITE
Ignition #1:WHITE/ REDIGNITION SWITCH HARNESS
Ignition #2:BLACK/ ORANGEIGNITION SWITCH HARNESS
Ignition #3:N/A
Accessory:WHITE/ GREENIGNITION SWITCH HARNESS **
Brake Light:RED / BLUE (+)AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:BLACKIN GRAY PLUG INSIDE OF DRIVER'S KICK PANEL
Parking Lights:GREEN (+)# PIN CONNECTOR AT FUSE BOX
Headlights:RED / YELLOW OR BLACK / YELLOW (-)STEERING COLUMN HARNESS ***
Diesel Glow Plug:N/A
Clutch Bypass Wire:N/A
Notes:* This vehicle is equipped with a transponder immobilizer system. See Installation Note #144 - Bypassing Transponder Theft Systems. ** Wires From This Plug Head Up Towards The Instrument Cluster. *** Use RED / Yellow on Vehicles Equipped With DRL's and Bla
Alarm and Keyless Entry Wiring Colors and Notes
FunctionVehicle ColorLocation
Constant +12 Volts:WHITE/ BLUE OR WHITE/ REDIGNITION SWITCH HARNESS
OEM Alarm Disarm:DISARMS WITH UNLOCK
OEM Horn:GREEN/ BLACK (-)STEERING COLUMN HARNESS
Power Lock:BLUE/REDINSIDE OF DRIVER'S DOOR ****
Power Unlock:BLUE/WHITE & BLUE/BLACKINSIDE OF DRIVER'S DOOR ****
Trunk Release:BLUE (-)AT SWITCH ON DASH *****
Alarm Input Wire:RED / BLUE OR RED (-)RIGHT SIDE OF FUSE BOX
Notes:

**** See Installation Note #212 Modern Toyota Door Locks Diagram. ***** Switch Inside Of Glove Box Must Be On For Trunk Release To Work.

https://www.designtech-intl.com/pdf/notes/note133.pdf





Posted By: KarTuneMan
Date Posted: December 02, 2005 at 1:00 AM

Let me know if you need some info on how to pop the trunk....it's not an easy hook up.......if your gonna do it

PM me.......



-------------




Posted By: Mike M2
Date Posted: December 02, 2005 at 7:04 AM
Trunk relaese is a simple negative pulse, no relays needed. The locks however will require a relay and two diodes...

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: KarTuneMan
Date Posted: December 02, 2005 at 8:30 AM

Mike M2 wrote:

Trunk relaese is a simple negative pulse, no relays needed. The locks however will require a relay and two diodes...

Not with factory security...you need to break the trunk pop wire with a relay and trigger the key sence wire at the same time. This will bypass the factory security.



-------------




Posted By: mobileworks
Date Posted: December 02, 2005 at 7:58 PM

databus module for an easy install





Posted By: Mike M2
Date Posted: December 02, 2005 at 9:49 PM
Why bypass the factory alarm? Who opens the trunk with the car armed? Just pulse the blue wire...

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: KarTuneMan
Date Posted: December 03, 2005 at 11:16 AM
OK!

-------------




Posted By: Mike M2
Date Posted: December 03, 2005 at 4:26 PM
posted_imageposted_imageposted_image

-------------
Mike M2
Tech Manager
CS Dealer Services





Print Page | Close Window