Factory Disarm wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6976
Printed Date: May 03, 2025 at 10:10 PM

Topic: Factory Disarm wire

Posted By: NextelOnline123
Subject: Factory Disarm wire
Date Posted: December 21, 2002 at 9:02 PM

I am hooking up a crimestopper remote start on a 988 blazer. I have everything hooked up but the door locks. I am wanting to know do I ahve to hook up the factory disarm wire if I use the crimestopper keyless enrty. I was thinking that If I didn't that since I have the factory(OEM) keyless sytem that it would make the alarm go off if I unlock the door will the crimestopper system. Someone please help.

Replies:

Posted By: finnman925
Date Posted: December 21, 2002 at 11:22 PM

none of my diagrams show a fact alarm in the 98 - just hook up the locks - lt blue and white to the left of the accelerator - (+)

test the alarm by locking with the fact remote with the window down and unlocking the door manually after about 30 sec.

good luck

Posted By: NextelOnline123
Date Posted: December 22, 2002 at 6:25 PM

yeah you were right. There is no alarm. Thanks alot

Print Page | Close Window