2004 Silverado Remote Start

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71775
Printed Date: May 16, 2024 at 2:32 AM

Topic: 2004 Silverado Remote Start

Posted By: holtonch
Subject: 2004 Silverado Remote Start
Date Posted: January 29, 2006 at 8:36 PM

I am putting a remote start in my Silverado but the engine cranks and dies immediately. I have both ignition wires and the accessory hooked up. Is there a anti-theft bypass I need to perform and how?

Replies:

Posted By: KarTuneMan
Date Posted: January 29, 2006 at 10:38 PM

Category:	Immobilizer Bypass
Required:	Yes
Type:	Passlock II
Part#:	556LW
Notes:	Not required if using the combo interface module. The Passlock II wire colors are yellow, black, and RED / white (not used).
Alternates:	555LW, DesignTech 20402, DesignTech 29402

Category:	Combo Interface
Required:	Yes
Type:	Data Bus
Part#:	457GW

-------------

Posted By: autotek27
Date Posted: February 09, 2006 at 6:31 PM

You can also use the Bulldogsecurity 791 unit..if the truck has a transponder in the key..u will need a programmed second key to place in the bypass module..all wiring info comes with module.

-------------
b-(

Posted By: tjdurham
Date Posted: February 10, 2006 at 12:04 AM

there is a system called Passlock 2 that is in your truck get a Trilogix GMDL-BP it will bypass the system while RS and give door locks and disarm the theft system there is no transponder in the key

you can get it fron bypasskit.com

-------------
tj

Print Page | Close Window