I have an rsx base model and would like to put in an alarm with remote start.
could you add the rsx to the database and provide diagrams or info on how to install remote start
in a manual transmission car
-------------
another Xclusive installation
Remote Starter Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Start: | | | BLACK/ WHITE | IGNITION SWITCH HARNESS * |
Ignition #1: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Ignition #2: | | | BLACK/ RED | IGNITION SWITCH HARNESS |
Ignition #3: | | | N/A | |
Accessory: | | | WHITE/ RED | IGNITION SWITCH HARNESS |
Brake Light: | | | WHITE/ BLACK | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | BLUE | AT TEST CONNECTOR BEHIND DRIVER'S HEADLIGHT |
Parking Lights: | | | RED / BLACK (+) | AT FUSE BOX |
Headlights: | | | BLUE/RED (-) | AT HEADLIGHT SWITCH |
OEM Alarm Disarm: | | | WHITE (-) | AT SECURITY MODULE *** |
OEM Alarm Arm: | | | WHITE/ RED (-) | AT SECURITY MODULE *** |
Diesel Glow Plug: | | | N/A | |
Clutch Bypass Wire: | | | | |
Notes: | | * This Vehice Is Equipped With A Transponder Type Theft Systems. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Constant +12 Volts: | | | WHITE | IGNITION SWITCH HARNESS |
Starter Kill: | | | BLACK/ WHITE | IGNITION SWITCH HARNESS * |
Ignition +12 Volts: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | | GREEN AND LT. GREEN/ RED (-) | AT SECURITY MODULE ** |
OEM Horn: | | | ORANGE (-) | STEERING COLUMN HARNESS *** |
Power Lock: | | | WHITE/ BLUE (-) | DRIVER'S OR PASSENGER KICK PANEL **** |
Power Unlock: | | | WHITE/ GREEN (-) | DRIVER'S OR PASSENGER KICK PANEL **** |
Trunk Release: | | | N/A | |
Alarm Input Wire: | | | GREEN AND LT. GREEN/ RED (-) | AT SECURITY MODULE ** |
Notes: | | ** Securtiy Module Is Located To The Left Of The Steering Column. Green Is Driver's Door And Lt. GREEN/ Red Is Passenger Door. Use Both Wires For Alarm Input and Diode Isolate Both. Use Only One Wire For Dome Light Supervision. *** Security Module Is Located To The Left Of The Steering Column. **** Wires Can Also Be Found In A 13 Pin Plug At The Multiplex Control Unit Located At The Back Of The Fuse Box. |
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
thank you very much for the info
will I need the clutch bypass wire for remote start
if so I didn't see the color or location on the info you sent
it is a manual trans vehicle
-------------
another Xclusive installation
Unfortunately, I don't have this information yet as we update this info as the vehicles come in. Most Honda and Acuras have a 2 wire clutch bypass system that you can get to by reaching uder the dash. It will be a negative trigger though. Sorry, I can't help you further on this. Try to repost for the clutch bypass wire for additional help.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Hey Audio Xclusive,
In Acura usually the clutch bypass is easy enough. Follow the BLACK/ White starter wire from the column to the clutch relay. There is a thick BLACK/ Red wire which is the starter wire going out to the starter itself. Simply put your Starter output wire of your remote starter wire here. The E-brake wire can be found at the daytime running lights module if your car is so equipped and it is a GREEN/ Red wire neg trigg.
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
They will be the same. The Type-S just has engine, exhaust & suspension differences, not the electrical or the ignition.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA