Print Page | Close Window

interior lights crown victoria

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7374
Printed Date: May 02, 2024 at 4:24 AM


Topic: interior lights crown victoria

Posted By: S. HAGUE
Subject: interior lights crown victoria
Date Posted: December 30, 2002 at 10:56 AM

 Have a 94 crown victoria that was a FBI unit with intercepter package the problem i have is the interior lights do not come on when the doors are opened . I do have power at the fuse, and when i turn the light switch control all the way to the left the lights do come on. I can not find any wiring diagrams that address this circuit. Everything else on this fuse works. Does this circuit have a relay ?. If so where whould it be located? A wiring diagram would be helpful but any infomation on which wire may be cut or removed to cause this problem would be much appreciated 




Replies:

Posted By: brianh
Date Posted: December 31, 2002 at 8:39 AM
It is possible that the dome light was wired that way on purpose.  So if they left the door open for a extended period of time the battery wouldnt die.  Just a quick thought.  Brian




Posted By: Velocity Motors
Date Posted: December 31, 2002 at 8:43 AM
They might have unplugged the door pin switch at the contact point.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window