toyota matrix remote start

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73924
Printed Date: May 03, 2024 at 5:40 AM

Topic: toyota matrix remote start

Posted By: impala_man2003
Subject: toyota matrix remote start
Date Posted: March 04, 2006 at 7:21 PM

i have connected all the main wires but the car in still not turing over i am only using the remote start function. not the alarm i think that i am supopsed to use some one the 24 pin wires in that harrness what are the main ones that i need to use for the install. i have used the brake wire, the sys ground and the tach output whic other wires should i use just for the remote start function.

-------------
L67 Master (GM 3.8 SC)

Replies:

Posted By: genehewett
Date Posted: March 04, 2006 at 9:59 PM

More info like what brand and model is the system? What year is the car?

Posted By: impala_man2003
Date Posted: March 04, 2006 at 10:03 PM

2003 toyota matrix audiovox 996a

-------------
L67 Master (GM 3.8 SC)

Posted By: xscash
Date Posted: March 06, 2006 at 7:18 PM

this remote starter has a control switch...it has a red plug on it. this must be in place and on in order for the unit to work. also the tach signal must be learned.

this vehicle has a transponder based key. if you are not using a bypass and extra key it will not function.

try to test with key in ignition. not turned on just pushed in.

Print Page | Close Window