Chrysler 300c stereo

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74000
Printed Date: May 04, 2024 at 9:06 AM

Topic: Chrysler 300c stereo

Posted By: toofly2
Subject: Chrysler 300c stereo
Date Posted: March 05, 2006 at 8:14 PM

I am wondering if anyone has installed a stereo in a Chrysler 300c. A local retailer installed an Eclipse AVN5435 for me and did not connect the power wire to the ACC, instead the stereo turns on only when the key is in the on position. What wire to I need to tap to correct this problem. Also, if anyone has the wiring information for all the wires I will need to install another stereo and alarm, I would greatly appreciate it.

Thanks

-------------
toofly2

Replies:

Posted By: xscash
Date Posted: March 05, 2006 at 8:24 PM

the wire harness at the radio does not have a acc wire. so your installer had to run a witre to the ign.

also....this car has a can-bus system..this system turns the amp and factory radio on. this system cannot be turned on by an out side source like regular systems.....which means you must replace both when adding a radio.

amp location is left of steering column

Posted By: oddball
Date Posted: March 09, 2006 at 6:09 AM

Hello TOOFLY2,

As ACC wire you mentoned at 300C, it is easy.

Just pick up ACC at cigar lighter below your head-unit.

Good Luck!

Print Page | Close Window