2000 hyundai door locks
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74624
Printed Date: May 13, 2024 at 5:23 PM
Topic: 2000 hyundai door locks
Posted By: xtremeimage
Subject: 2000 hyundai door locks
Date Posted: March 17, 2006 at 1:19 AM
help the schematic her doest show the wires for the electric door locks
Replies:
Posted By: audiophd
Date Posted: March 17, 2006 at 9:09 AM
dude more info is needed.......... what model car is it.
Posted By: the12volt
Date Posted: March 17, 2006 at 9:29 AM
Posted By: xtremeimage
Date Posted: March 17, 2006 at 1:57 PM
sorry ok here is what i got 2000 elentra h it has electric door locks and windows. but the schematic only shows the door triger. where do i find the wires that control the door locks.
Posted By: Hornshockey
Date Posted: March 17, 2006 at 5:07 PM
you'll have to add an actuator in the driver door to physically move the driver door lock mechanism. All the other doors will lock/unlock with the driver door.
-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
Posted By: xtremeimage
Date Posted: March 17, 2006 at 11:36 PM
ah i told you guys it has electric door locks. the doors lock all lock with the drivers door. obsusly there are actuators already in the doors. by adding an alarm i will be able to ad the keyless entry. so do i need to tap into the wire that controls the drivers dooor?
Posted By: NowYaKnow
Date Posted: March 17, 2006 at 11:48 PM
If the vehicle didn't have power locks, you would have to add actuators in ALL doors.
Since it does have power locks, you only have to add an actuator in the drivers door. This is the only way there is no wire to tap into. Good luck,
Mike
Posted By: xtremeimage
Date Posted: March 18, 2006 at 7:24 PM
ok so if when i lock the drivers door. the lock has to be connected to a wire somehow, otherwise how would all the doors lock? i need to take the door abart and look inside? or would it be better to get a dealer book on the car. i guys not to many people know anything about these cars hu? thanks i have to investigate
Posted By: NowYaKnow
Date Posted: March 18, 2006 at 9:08 PM
No need to investigate I will make it real easy for you. Go out to the front PASSENGER door of your car, manually lock and unlock that door. Does the drivers door lock and unlock along with it?
If it does, then there is an actuator in the drivers door and you don't have to add one.
If it doesn't, then there is no actuator in the drivers door and you will have to add one.
Good luck,
Mike
Posted By: xtremeimage
Date Posted: March 19, 2006 at 3:16 PM
ok i will try that its kind a hard when i dont have the car in front of me . my daughter is always out and about thanks
|
the12volt • Support the12volt.com