remote start problem w/ 95 firebird (VATS bypass)

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7480
Printed Date: May 05, 2024 at 5:36 PM

Topic: remote start problem w/ 95 firebird (VATS bypass)

Posted By: blackbird19
Subject: remote start problem w/ 95 firebird (VATS bypass)
Date Posted: January 01, 2003 at 12:29 PM

i'm installing a bulldog securtiy remote starter and am having trouble with the VATS key. i have measured the resistance and purchased a resistor of equal resistance. i also have a DEI P/N 8617 relay assembly. now what? my question is, how do i incorporate the resistor and relay with the wires of the RS and the car to bypass the VATS? the resistor goes where with what wire(s)? any help is greatly appreciated.

-------------
-Chris

Replies:

Posted By: Velocity Motors
Date Posted: January 01, 2003 at 4:26 PM

https://www.velocitymotorsport.com/install_notes/Chevy.htm

Go and click on the VATS bypass link in the above link

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: blackbird19
Date Posted: January 04, 2003 at 11:23 AM

thanks for the suggestion but the web page that the link belongs to does not work. i've tried to access it for three days and it still does not work. is there any other suggestions that could help with the bypass of the VATS.

-------------
-Chris

Posted By: Velocity Motors
Date Posted: January 04, 2003 at 4:58 PM

?????????? I can access it no problem . Can you get this to come up on your screen:

GM VATS bypass Part 1
GM VATS bypass Part 2

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: blackbird19
Date Posted: January 05, 2003 at 2:09 PM

i get the:

GM VATS bypass Part 1
GM VATS bypass Part 2

up on the screen but then it's a dead end for me. i've tried on two different computers and the same result. it says the page cannot be displayed. i've tried going to the velocity motorsports web site and accessing the link the long way but the whole website is messed up. it says they're currently under construction. i'll wait another day or two and try again.

-------------
-Chris

Posted By: Velocity Motors
Date Posted: January 05, 2003 at 10:19 PM

Fixed the problem. Try this now:

GM VATS bypass Part 1
GM VATS bypass Part 2

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA