Commando RS-560 Remote start

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7795
Printed Date: May 02, 2025 at 5:57 AM

Topic: Commando RS-560 Remote start

Posted By: heyguy007
Subject: Commando RS-560 Remote start
Date Posted: January 07, 2003 at 4:58 PM

HELP, I recently purchased and installed a Commando RS-560 Remote start, keyless entry ,Alarm. (For a 1994 Toyota 4Runner)

Well everything works great except for the remote start. I get nothing when i press the remote key I've rechecked my ignition wires but i cant get it to start! Does the remote have to be programmed if you are using the Tach wire? The instructions are very confusing on what to do.

-------------
Proud owner of a Black 1994 Toyota pickup,V6 ext cab custom rims etc.And also a 1994 Forest Green 4Runner(Family Wagon).

Replies:

Posted By: brianh
Date Posted: January 07, 2003 at 9:17 PM

Does the RS unit have a tachless mode? Check your ground on the unit and make sure that its good. It sounds like you dont have the proper start wires powered up.Her are the wires that need to be hooked up. Ignition #1 BLACK/ red ,Ignition#2 BLACK / YELLOW, Accessory blue/red,starter wire Black. If your unit has a anti grind feature(starter kill)make sure that you hook the main ignition wire on the starter side of the relay. If you need any more help feel free to e mail me directly. Good luck. Brian

Posted By: jrilla
Date Posted: January 08, 2003 at 9:14 AM

Look in your install manual for start feature II programming. follow the instructions just below it that read: "Tachometer checking type". Follow these instructions all the way up to "Voltage checking Type". Keep me posted

-------------
J Rilla

Owner/Installer