2006 Kia Sorento Alarm/Remote Start Wiring

Just purchased this vehicle and am planning to put a R.S on it with window role up modules. Cant find any new wiring info on it though. If anyone has any tips or suggestions for this install please let me know. Thanks in advance.


                                      Brian

12volts	green (40A), blue (30A)	+	ignition harness
Starter	red	+	ignition harness
Second Starter	N/A
Ignition	yellow	+	ignition harness
Second Ignition	N/A
Third Ignition	N/A
Accessory	orange	+	ignition harness
Second Accessory	white	+	ignition harness
Keysense	yellow/orange	+	ign harn or ETACS, 15 pin plg, pin 3
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Power Lock	blue	-	DKP or ETACS, 23 pin plug, pin 4
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Power Unlock	white	-	DKP or ETACS, 23 pin plug, pin 14
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Lock Motor	red	5wi	relay above driver kick
Unlock Motor	white	5wi	DKP or ETACS, 14 pin plug, pin 5
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Parking Lights+	red	+	driver kick, harness to rear
Parking Lights-	white	-	switch or ETACS, 23 pin plug, pin 1
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Hazards	yellow	-	relay or ETACS, 23 pin plug, pin 19
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Turn Signal(L)	red	+	turn signal switch
Turn Signal(R)	orange	+	turn signal switch
Reverse Light	blue/black	+	driver kick, harness to rear
Door Trigger	yellow (door ajar indicator)	-	cluster or ETACS, 23 pin plg, pin 16
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio. The individual door trigger wires are also at the ETACS module, in the 15 pin plug. The LF door is blue in pin 4. The RF door is GREEN/ black in pin 12. The rear doors are blue/black in pin 11. Use all three wires and diode isolate each.
Dome Supervision	RED / black	-	DKP or ETACS, 14 pin plug, pin 11
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Trunk/Hatch Pin	GREEN/ orange (ajar indicator)	-	cluster or ETACS, 14 pin plg, pin 10
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Hood Pin	N/A
Trunk/Hatch Release	RED / orange	-	relay or ETACS, 14 pin plug, pin 3
Notes: The hatch release relay is above the driver kick. The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Power Sliding Door	N/A
Factory Alarm Arm	green	-	DKP or ETACS, 23 pin plug, pin 5
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Factory Alarm Disarm	orange	-	DKP or ETACS, 23 pin plug, pin 15
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Disarm No Unlock	see factory alarm disarm
Tachometer	GREEN/ black	ac	cluster or ECM, 28 pin plug, pin 5
Notes: The ECM (Engine Control Module) is behind the glovebox.
Wait to start	N/A
Brake Wire	white	+	brake pedal switch
Parking Brake	orange	-	parking brake switch or cluster
Horn Trigger	blue/black	-	switch or ETACS, 23 pin plug, pin 6
Notes: The ETACS (Electronic Time and Alarm Control System) module is behind the radio.
Memory Seat 1	N/A
Memory Seat 2	N/A
Memory Seat 3	N/A

Interface Module:	Category: Immobilizer Bypass	Required: No	Type: N/A
Part #: N/A
Notes:

Thanks for the wiring info. That helps out alot. Does anyone have the power window wire colors for up and down?          Brian