2002 Jeep Liberty door locks

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79374
Printed Date: June 11, 2024 at 3:59 AM

Topic: 2002 Jeep Liberty door locks

Posted By: ScottS
Subject: 2002 Jeep Liberty door locks
Date Posted: June 20, 2006 at 3:55 PM

Well I have gathered all my resources and I just cannot seem to find the door lock wire. Everything I have seen says to grab the pink with violet strip in the c2 connector on the bcm pin 14. There is no wire going into pin 14 and I have found one pink with violet stripe. The one that i found is in the c1 junktion to the fuse box and has no control whatsoever to the door locks the best I can tell I have metered and metered it and nothing anyone have any other idea's? Do I need the bypass ?

Replies:

Posted By: sparkie
Date Posted: June 20, 2006 at 8:13 PM

The Liberty has connectors on the fuse box for various circuits and it has 2 connectors on the forward edge for the BCM. The connector you require is a large connector at the top corner of the BCM/fuse box closest to the driver's seat. The wire is PURPLE / pink and requires a ground through a 1.4k ohm resistor to lock and ground through a 440 ohm resistor to unlock. You must use relays to insure absolute ground through the resistor. If you can't find the wire in the connector, look in the harness coming in from the driver's door as it is also there.

-------------
sparky

Print Page | Close Window