Print Page | Close Window

1999 Range Rover, Harman Kardon LOC?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80613
Printed Date: May 06, 2025 at 3:27 PM


Topic: 1999 Range Rover, Harman Kardon LOC?

Posted By: mepca.team
Subject: 1999 Range Rover, Harman Kardon LOC?
Date Posted: July 22, 2006 at 4:31 PM

Hello,

1999 Range Rover with Harman/Kardon sound package

Where should I get the input for a LOC, Ive read in another post where taping into the signal sent to the sub amp didnt work.

If anyone knows the wiring layout for this vehicle or any advice on adding amp/subs without a complete rewire, please help.

Thanks Guys!




Replies:

Posted By: josh1979
Date Posted: July 22, 2006 at 4:35 PM

Radio 12v purple  +  radio
Radio Ground black  -  radio
Radio Ignition WHITE/ pink  +  radio
Radio Illumination RED / white (dimmer)  +  radio
Factory Amp Turn-on N/A    
Power Antenna gray/black  +  radio
LF Speaker +/- yellow - yellow/black  +,- radio
RF Speaker +/- red - RED / black  +,- radio
LR Speaker +/- green - GREEN/ black  +,- radio
RR Speaker +/- blue - blue/black  +,- radio
posted_image
Interface Module:Category:
Immobilizer Bypass 		Required:
Yes


-------------
bring back the rotary phone so i dont have to press 1 to proceed in english



Posted By: mepca.team
Date Posted: July 22, 2006 at 9:20 PM

Thanks josh1979

I was able to tap into the output from the sub amp to feed the LOC, and for those interested, I found out that there are harness adaptors availible which allow you to install aftermarket HU without cutting any of the existing car wiring.


Print Page | Close Window