2002 Tundra Factory Alarm Arm?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81815
Printed Date: May 06, 2024 at 2:41 PM

Topic: 2002 Tundra Factory Alarm Arm?

Posted By: Silvrefox
Subject: 2002 Tundra Factory Alarm Arm?
Date Posted: August 19, 2006 at 9:19 PM

Did Remote Start and Keyless entry on customer's vehicle today, now customer is angry because he wants his FACTORY security to arm and disarm with his new keyless or he will have it all removed. DEI shows a factory alarm disarm (blue/black in driver's door harness) but no arm wire. Any suggestions???

John

Replies:

Posted By: josh1979
Date Posted: August 19, 2006 at 9:30 PM

all i have is dei info too you can call dei see if thay can help im sure his car only had door trigger and if we cant arm it all we need to do is get that to trigger the horn. which unit did you install?

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english

Posted By: Silvrefox
Date Posted: August 19, 2006 at 10:01 PM

DEI 561R.

Posted By: josh1979
Date Posted: August 19, 2006 at 10:23 PM

crap thatunit does not have a ground when armed out put because if it did i had a solution i cant thing of any way to do it with this one dei says the

Factory Alarm Disarm

blue/black

drivers door harness

i would guess the arm wire is there too. use the factory remote to see if it is arm with remote only or can you arm with the key in the door, if you can arm withe the key there has to be a wier some where in there. but i would call tech support to see if thay have any more info on this. let me know if i can help any more

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english