2006 Toyota Tacoma Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83234
Printed Date: April 29, 2024 at 11:05 AM
Topic: 2006 Toyota Tacoma Alarm/Remote Start Wiring
Posted By: illicite
Subject: 2006 Toyota Tacoma Alarm/Remote Start Wiring
Date Posted: September 22, 2006 at 9:21 PM
where I can find the wiring diagram of a Toyota Tacoma 2006 for the installation of an alarm starter ??
Replies:
Posted By: gcorrea
Date Posted: September 22, 2006 at 9:40 PM
12volts
wht/blue (50A), wht/red (30A)
+
ignition harness
Starter GREEN/ black + ignition harness
Second Starter BLACK/ white + ignition harness
Ignition BLACK/ red + ignition harness
Second Ignition blue / YELLOW + ignition harness
Third Ignition N/A
Accessory WHITE/ green + ignition harness
Second Accessory N/A
Keysense GREEN/ black - ignition harness
Power Lock purple - driver kick, 10 pin plug, pin 4
Power Unlock GREEN/ black (double pulse) - driver kick, 10 pin plug, pin 8
Lock Motor blue/red 5wi driver kick, 12 pin plug, pin 10
Unlock Motor blue/black 5wi driver kick, 10 pin plug, pin 9
Parking Lights+ green + fuse box, 13 pin plug, pin 10
Parking Lights- green - headlight switch or BECU, pin 13
Hazards RED / white or white - switch or turn signal flasher,pin 10
Turn Signal(L) RED / black (F), blue/black (R) + turn signal flasher, pins 4 and 5
Turn Signal(R) RED / yellow (F), blue / YELLOW(R) + turn signal flasher, pins 2 and 3
Reverse Light RED / white + driver kick, gray 12 pin plug, pin 1
Door Trigger GREEN / WHITE (ajar indicator) - instrument cluster or BECU, pin 4
Dome Supervision blue - fuse box, black 13 pin plug, pin 9
Trunk/Hatch Pin N/A
Hood Pin N/A
Trunk/Hatch Release N/A
Power Sliding Door N/A
Factory Alarm Arm arms with lock
Factory Alarm Disarm disarms with unlock
Disarm No Unlock use key sense wire
Tachometer BLACK/ white ac data link connector, pin 9
Wait to start N/A
Brake Wire blue + fuse box, 11 pin plug, pin 2
Parking Brake GREEN/ YELLOW - fuse box, 18 pin plug, pin 5
Horn Trigger GREEN/ red - fuse box, 18 pin plug, pin 10
Memory Seat 1 N/A
Memory Seat 2 N/A
Memory Seat 3 N/A
Interface Modules
Smart Starter Kill Relays
MAKE : TOYOTA | MODEL : TACOMA | YEAR : 2006
* The logo is registered trade mark of Toyota Corporate.
Copyright © 2000-2006 Directed Electronics, Inc. All Rights Reserved. Revised: 25 March 2006
This website is for the sole use of authorized DEI personel and it's participating installers and retailers. The information contained on these pages may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited.
-------------
gcorrea
Posted By: illicite
Date Posted: September 22, 2006 at 9:44 PM
wow!! you are a really fast guy thanks
Posted By: je3169
Date Posted: September 23, 2006 at 12:33 AM
If you are installing a remote start read this UPDATE: blue /white lock(-)and gray(-) unlock drivers side kick panel there are 2 plugs that go to the drivers door one has these wires and the other has the wires green(-)&purple(-) difference is the green and purple will not work when the RS is on where the blue/white & gray will lock and unlock reguardless. John -------------
Posted By: itwanabe
Date Posted: September 24, 2006 at 8:09 PM
This is going to sound really stupid but I took off my bulldog remote start because of the stupid instructions. Or maybe I think its the end user. Could someone clarify this for me please (in the order I asked)
1. If there is a 10pin plug and only 7 pins are used, is this referred to as a 7pin plug? (just an example)
because I can't find some of the wires saying "13pin" "18 pin" etc.
2. where is the fasd wire? is this same as the FACTORY ALARM DISARM wire (GREEN/ black)?
I'm going to give this another shot tomorrow morning to see if i can get it to work. If not, i'm going to raise hell and curse everyone 
Posted By: KarTuneMan
Date Posted: September 24, 2006 at 8:30 PM
1) If the plug has 10 pins, but only 7 wires....it's a 10 pin plug! 2) never hear the term fasd Factory Alarm Disarm disarms with unlock
Disarm No Unlock use key sense wire -------------
Posted By: KarTuneMan
Date Posted: September 24, 2006 at 8:31 PM
itwanabe wrote:
This is going to sound really stupid but I took off my bulldog remote start because of the stupid instructions. Or maybe I think its the end user. Could someone clarify this for me please (in the order I asked)
1. If there is a 10pin plug and only 7 pins are used, is this referred to as a 7pin plug? (just an example)
because I can't find some of the wires saying "13pin" "18 pin" etc.
2. where is the fasd wire? is this same as the FACTORY ALARM DISARM wire (GREEN/ black)?
I'm going to give this another shot tomorrow morning to see if i can get it to work. If not, i'm going to raise hell and curse everyone
Should this be a "NEW" topic....? -------------
Posted By: itwanabe
Date Posted: September 24, 2006 at 8:41 PM
<quote>Should this be a "NEW" topic...?</quote>
NO.
This has to do with the wiring diagram=) New thread would just be more confusing to others who are searching. The bulldog site has their diagram as shown HERE
and I was just really confused comparing to the one diagram in read in this thread. I took out the remote start because I was frustrated and googled myself here which gave me a little more hope.
Posted By: rbc827
Date Posted: September 26, 2006 at 9:25 PM
I installed a power tailgate lock on my 2006 Tacoma and the instructions were to use the Blue/Black for Unlock and the Blue/Pink wire for Lock. These are +12 input.
Posted By: gcorrea
Date Posted: September 26, 2006 at 11:56 PM
use a relay for locking and unlocking.
-------------
gcorrea
Posted By: itwanabe
Date Posted: September 28, 2006 at 11:24 PM
gcorrea wrote:
use a relay for locking and unlocking.
The bulldog comes with relays=) Could anyone tell me what the BECU is and where it is? I'm going to take pics tomorrow of my install.
Posted By: gcorrea
Date Posted: September 28, 2006 at 11:58 PM
TOYOTA, TACOMA, 2006
The Body ECU is attached to the back of the fuse box. It has a single 26 pin plug.
-------------
gcorrea
Posted By: itwanabe
Date Posted: September 29, 2006 at 10:16 AM
Could you help me find the Keysense wire please? In the igition bundle, there is only seven wires and the GREEN/ black + is a starter wire. I can't find the GREEN/ black - wire. I managed to get the car to remotely start but I can't lock my car with the stock remote.
I'll add pics up tonight!
Posted By: KarTuneMan
Date Posted: September 29, 2006 at 11:34 AM
Its in a plug with a WHITE/ black on the right side of the column. The power door locks WILL NOT work (with the remote) while the engine is running.
-------------
Posted By: itwanabe
Date Posted: September 29, 2006 at 2:15 PM
KarTuneMan wrote:
Its in a plug with a WHITE/ black on the right side of the column. The power door locks WILL NOT work (with the remote) while the engine is running.
I think this can be bypassed but I'll have to do that later when I get there=) I'll ask about it!
Out of two of those photos, where is the plug you are talking about? I tried to find it but couldn't. If you need me to take a few more shots elsewhere, i'll do so. thankx for all the help!
Posted By: Mike M2
Date Posted: October 02, 2006 at 10:01 PM
Keysense is located right by the key cylinder, two pin plug. Go directly to the steering column....
-------------
Mike M2
Tech Manager
CS Dealer Services
|