hi everyone....
i'm looking for the wiring diagrams for a 02 mazda protege. any help will be great.
thanks in advance
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|BLACK/ white, black |+ |ignition harness |
| STARTER|BLACK/ blue |+ |ignition harness |
| IGNITION|blue |+ |ignition harness |
| SECOND IGNITION|BLACK/ red |+ |ignition harness |
| ACCESSORY|BLACK/ white |+ |ignition harness |
| POWER LOCK|lt GREEN/ red *1 |- |module high in driver kick |
| POWER UNLOCK|same wire | | |
| LOCK MOTOR|red | |door lock relays *2 |
| UNLOCK MOTOR|blue | |door lock relays *2 |
| DISARM DEFEAT|RED / black | |door lock relays *2 |
| PARKING LIGHTS +|lt GREEN/ black | |drivers kick panel |
| PARKING LIGHTS -|brown | |headlight switch |
| HEADLIGHTS|RED / yellow |- |headlight switch |
| DOOR TRIGGER|BLACK/ blue |- |drivers kick panel |
| DOME SUPERVISION|use door trigger | | |
| TRUNK/HATCH PIN|RED / green |- |at light in trunk |
| FCTRY ALARM ARM| | | |
|FCTRY ALRM DISARM| | | |
| TACHOMETER|PURPLE / white | |diagnostic connector *3 |
| SPEED SENSE|orange or grn/red | |pin 58 of ECM *4 |
| BRAKE WIRE|GREEN/ YELLOW |+ |brake switch |
| HORN TRIGGER|BLACK/ red |- |steering column |
| WIPERS|blu/wht(L),blu/red(H|+ |steering column |
| LF WINDOW UP/DN|RED / blk - yel/grn |A |drivers door switch |
| RF WINDOW UP/DN|grn/wht - lt grn/blk|A |drivers switch or kick panel|
| LR WINDOW UP/DN|RED / grn - yel/red |A |drivers switch or kick panel|
| RR WINDOW UP/DN|blu/wht - grn/red |A |drivers switch or kick panel|
Notes:
*1 This is a one wire system, must use relays. Lock requires negative trigger through a 1.5K resistor, Unlock requires a negative trigger to the same wire. *2 The door lock relays are located to the drivers side of the brake pedal. *3 The diagnostic connector is in driver side rear corner of the engine compartment. Can also find tach in pin 48 of the ECM. *4 The ECM is behind the passenger side of the dash.
-------------