Print Page | Close Window

sebring alarm

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85521
Printed Date: May 01, 2025 at 6:10 PM


Topic: sebring alarm

Posted By: boper10
Subject: sebring alarm
Date Posted: November 12, 2006 at 12:21 PM

i recently installed a remote car starter for my 2002 sebring but the security system keeps turning the engine off does any one know how to disarm the system. i bought the transponder key and installed all that crap it still shuts off i just want to shut off the factory alrm engine shut off or the system all together.



Replies:

Posted By: Mike M2
Date Posted: November 13, 2006 at 6:55 AM
There's 2 ways of doing this on the Sebring. You can simply hook up keysense and make sure the igntion switch is fully powered(both ignitions and both accessories) and it will disarm when it starts. It will however honk the horn before hand. The other way would be to connect the factory disarm wire to the RS. You do this by giving a positive pulse to the light GREEN/ orange wire located on the plug on the bottom of the fuse box. It's a 26 pin plug and you need to run a 750ohm resistor thru it for it to work.

-------------
Mike M2
Tech Manager
CS Dealer Services


Print Page | Close Window