Print Page | Close Window

2005 Chevrolet Suburban, Steering Wheel Stereo Wiring?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86229
Printed Date: May 02, 2025 at 8:31 PM


Topic: 2005 Chevrolet Suburban, Steering Wheel Stereo Wiring?

Posted By: fat42
Subject: 2005 Chevrolet Suburban, Steering Wheel Stereo Wiring?
Date Posted: November 26, 2006 at 4:47 PM

Hi..

Does anyone have the stereo wiring for a Suburban??  I particularly need the wiring colours for the steering wheel controls...

Cheers!!

Pete



-------------
Once You've Had Fat, You'll Never Go Back!



Replies:

Posted By: i am an idiot
Date Posted: November 26, 2006 at 5:20 PM

Don't know the wiring for it   but this page may offer some helpful products

https://www.pac-audio.com/products/productsCatagory.asp?mmSearch=Steering%20Wheel%20Interface




Posted By: master5
Date Posted: November 26, 2006 at 5:53 PM

Here are the basic color codes. For the steering wheel controls the link in the last reply makes the adaptors which come with the color codes for that..if you just need the codes call the companys tech support and they might give it to you if you can't find it elsewhere...good luck

Radio 12v  orange   +   radio harness 
Radio Ground  BLACK/ white   -   radio harness 
Radio Acc.  (Class 2 Serial Data)*       
Radio Illumination  BROWN / white (dimmer)   +   radio harness 
Factory Amp Turn-on  pink   +   radio harness 
Power Antenna  dk. green   +   radio harness  
 
LF Speaker +/-  tan - gray   +,-  radio harness
RF Speaker +/-  lt. green - dk. green   +,-  radio harness 
LR Speaker +/-  brown - yellow   +,-  radio harness 
RR Speaker +/-  dk. blue - lt. blue   +,-  radio harness 

Notes: If equipped, the amplifier is under the center console.

* class 2 serial data...if you are replacing the head unit you need to run your own accy wire but I reccomend the proper interface to retain chime, RAP and other features..you can use the scosche DCGM09 or similar..if you have onstar you need the onstar interface to retain it also available from scosche and others.



-------------


Print Page | Close Window