2005 Chevy Cobalt Radio Wire Colors
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88620
Printed Date: April 24, 2024 at 6:11 PM
Topic: 2005 Chevy Cobalt Radio Wire Colors
Posted By: vdaman
Subject: 2005 Chevy Cobalt Radio Wire Colors
Date Posted: January 09, 2007 at 2:39 AM
Looking for the radio wiring color code on a 2005 chevy cobalt.
Replies:
Posted By: Twelvoltz
Date Posted: January 09, 2007 at 6:58 AM
DEI Lists:
DIRECTWIRE™ WIRING INFORMATION - CHEVROLET / COBALT / 2005 / Audio
[PRINT THIS PAGE]
Radio 12v RED / white + radio harness
Radio Ground BLACK/ white - radio harness
Radio Ignition (GMLAN Serial Data)
Radio Illumination N/A
Factory Amp Turn-on pink + radio harness
Power Antenna yellow + radio harness
LF Speaker +/- tan - gray +,- radio harness or amp under driv dash
RF Speaker +/- lt. green - dk. green +,- radio harness or amp under driv dash
LR Speaker +/- brown - yellow +,- radio harness or amp under driv dash
RR Speaker +/- dk. blue - lt. blue +,- radio harness or amp under driv dash
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
Passlock
Part #: N/A
Notes: See DirectFax document 1603 for wiring information.
Interface Module: Category:
Door Lock Interface Required:
No Type:
Data Bus
Part #: IM-GMSD-1
Alternate Part1 #: 456LW
Notes:
Smart Starter Kill Relays: Relay Type:
Crank Relay Location:
Engine compartment fusebox, Driver side
Part #: 6402A
warning
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed Electronics assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
|