ProStart CT-3300

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8882
Printed Date: May 05, 2024 at 6:08 AM

Topic: ProStart CT-3300

Posted By: trcontracting
Subject: ProStart CT-3300
Date Posted: January 31, 2003 at 12:56 PM

I have installed remote keyless entry and remote start on my 1994 GMC Suburban but I can't figure out how to wire in the remote door locks. I don't have a wiring diagram and the instructions are not helping. It says the brown wire is the (-)500mA lock output and the green wire is the (-)500mA unlock output, where would I connect these wires on my vehicle. I would apprecaite any advice.

-------------
Thank You

Replies:

Posted By: jayts95
Date Posted: January 31, 2003 at 7:11 PM

You will need spdt relays.

85-brown wire from alarm

86-constant 12V

87-constant 12V

30-out to lt. blue wire in car

87A-not used

----------------------------------------------

85-green wire from alarm

86-constant 12V

87-constant 12V

30-out to BLACK/ red in car

87A-not used

-------------

Posted By: trcontracting
Date Posted: January 31, 2003 at 10:08 PM

Thanks Jason this worked perfectly.

-------------
Thank You

Print Page | Close Window