I need a wire diagram to hook up a car alarm with remote start,and keyless entry,and i would also like to hook up my remote to open my trunk
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|blk/blu or black |+ |steering column |
| STARTER|blk/yel or blk/red |+ |steering column |
| IGNITION|blk/wht or blk/yel |+ |steering column |
| SECOND IGNITION| | | |
| ACCESSORY|blk/red or blue |+ |steering column |
| POWER LOCK|GREEN/ black |*1 |driver kick panel |
| POWER UNLOCK|same wire | | |
| PARKING LIGHTS +|RED / black | |at dimmer switch |
| PARKING LIGHTS -|RED / yellow | |at headlight switch |
| HEADLIGHTS|WHITE/ yellow |- |at headlight switch |
| DOOR TRIGGER|RED / WHITE/ sil dot |- |lower drivers kick |
| TRUNK/HATCH PIN|red |- |at rear light |
| HOOD PIN|RED / white |+ |sw or light under hood |
| TACHOMETER|yellow/blue | |coil or diagn. plug |
| BRAKE WIRE|WHITE/ green |+ |brake pedal switch |
| HORN TRIGGER|GREEN/ orange |- |steering column |
| WIPERS| | | |
| LF WINDOW UP/DN|RED / blu - grn/blu |A |in drivers door |
| RF WINDOW UP/DN|grn/wht - RED / wht |A |in drivers door or dkp |
Notes:
*1 Lock requires a positive trigger. Unlock requires a positive trigger through a 4,700 ohm resistor. Must use relays for both lock and unlock.
-------------
would it be possible for someone to post a step by step guide for a car alarm keyless entry ,remote start for a 1990 ford probe,i have the unit but not the cash to pay for a pro install any help would be appreciated
