If anyone can help I need a wiring diagram for installin a keyless entry on a 2002 isuzu rodeo. I also cound use a wiring diagram for the steering wheel wires.
Thanks
-------------
isuzumuzu
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white, WHITE/ black |+ |ignition harness |
| STARTER|BLACK/ white |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|BLACK/ red |+ |ignition harness |
| ACCESSORY|blue |+ |ignition harness |
| POWER LOCK|lt. GREEN/ red |- |DKP white 22 pin connector |
| POWER UNLOCK|RED / blue |- |DKP white 22 pin connector |
| LOCK MOTOR|blue/red | |drivers door harness |
| UNLOCK MOTOR|blue/white | |drivers kick panel *1 |
| DISARM DEFEAT|blue | |passenger kick panel *2 |
| PARKING LIGHTS +|GREEN/ red | |drivers kick in a black plug|
| PARKING LIGHTS -|yellow or grn/yel | |steering column |
| HEADLIGHTS|red or RED / blue |- |steering column |
| DOOR TRIGGER|RED / green |- |drivers kick in a white plug|
| DOME SUPERVISION|use door trigger | | |
| TRUNK/HATCH PIN|tied in with door | | |
| HOOD PIN|GREEN/ red |- |keyless module *3 |
|TRNK/HTCH RELEASE|lt. green | |keyless module *3 |
| FCTRY ALARM ARM|purple *5 |- |drivers kick in a white plug|
|FCTRY ALRM DISARM|yellow/blue *5 |- |drivers kick in a white plug|
|
Notes: Is up to the installer to test all wire whenever possible with a DDM
*1 In a white 10 pin connector *2 Located up high in a white connector *3 The keyless module is located to the right of the glove box. *5 Trigger the power lock and the factory alarm arm wires at the same time to arm the alarm. Trigger the power unlock and the factory alarm disarm wires at the same time to disarm the alarm.
Luis
Sound Waves
thanks, I really appreciate the help.
-------------
isuzumuzu