1997 cadilac deville pass system

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89783
Printed Date: May 01, 2025 at 4:34 PM

Topic: 1997 cadilac deville pass system

Posted By: live1
Subject: 1997 cadilac deville pass system
Date Posted: January 30, 2007 at 10:06 AM

I am having trouble with the pass system(locating wires and coloursof pass1) on a 1997 cadilac deville I am new to the site and fairly new to GM. If any one could point me in the right direction in would be a huge help. Thanks I am using a pljx self learning resistor code interface

Replies:

Posted By: Big Dog
Date Posted: January 30, 2007 at 10:15 AM

Look for an orange plastic sleeve which comes down from the ignition switch towards the center console and at one end near the connector you'll see a PURPLE / white and a WHITE/ black. These are the wires you'll interface with.

Just make sure you're not in the yellow sleeved airbag wires!

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: live1
Date Posted: January 30, 2007 at 1:19 PM

thank you very much for your quick response. I am asuming one is a ground wire and the other is a reference(resistance wire) and I don't realy need the pljx interface . Thanks again

Posted By: Big Dog
Date Posted: January 30, 2007 at 1:43 PM

Here's how it's done: VATS

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: live1
Date Posted: January 30, 2007 at 10:04 PM

thank you again

Print Page | Close Window