Print Page | Close Window

2006 mazda mx 5

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90982
Printed Date: May 09, 2024 at 4:44 AM


Topic: 2006 mazda mx 5

Posted By: piomx5
Subject: 2006 mazda mx 5
Date Posted: February 25, 2007 at 8:16 PM

Any one have the new 06 for this to update the diagram database? (06 is new model year NC)

Thanks




Replies:

Posted By: KarTuneMan
Date Posted: February 26, 2007 at 9:53 AM
 PASSIVE ANTI-THEFT YES TRANSPONDER   SEE NOTES 
 12 VOLTS WHITE/ green Ignition switch harness   + 
 IGNITION GREEN / WHITE Ignition switch harness   + 
 ACCESSORY Pink/black Ignition switch harness   + 
 STARTER WHITE/ blue Ignition switch harness   + 
 KEY SENSE BROWN / red Ignition switch harness   + 
 TACH SIGNAL Use a fuel injector     
 FUEL INJECTOR Opposite from WHITE/ blue     
 LOCK BROWN / white DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to lock the doors and straight ground to unlock.
 UNLOCK Same as unlock wire DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to lock the doors and straight ground to unlock.
 DOORPIN BLACK/ blue In Driver's side A pillar (next to windshield)   - 
 If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 TRUNK PIN Orange At the switch on the trunk lock assembly   - 
 If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 TRUNK RELEASE Violet At release switch in dash   - 
 FACTORY ARM Gray/red DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to arm the OEM alarm. Use straight ground to disarm. If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 FACTORY DISARM Same as arm wire DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to arm the OEM alarm. Use straight ground to disarm. If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 BRAKESWITCH BLACK / YELLOW At switch above brake pedal   + 
 PARKLIGHTS BLACK/ green Low in driver's kickpanel   + 
 PARKLIGHTS (-) BROWN / black At light switch harness   - 
 HAND BRAKE Gray At switch on handbrake lever   - 
 HORN GREEN/ orange At steering column   - 
 If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 REVERSE LIGHTS RED / yellow Low in driver's kickpanel   + 


-------------



Posted By: KarTuneMan
Date Posted: February 26, 2007 at 9:54 AM
 PASSIVE ANTI-THEFT YES TRANSPONDER   SEE NOTES 
 12 VOLTS WHITE/ green Ignition switch harness   + 
 IGNITION GREEN / WHITE Ignition switch harness   + 
 ACCESSORY Pink/black Ignition switch harness   + 
 STARTER WHITE/ blue Ignition switch harness   + 
 KEY SENSE BROWN / red Ignition switch harness   + 
 TACH SIGNAL Use a fuel injector     
 FUEL INJECTOR Opposite from WHITE/ blue     
 LOCK BROWN / white DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to lock the doors and straight ground to unlock.
 UNLOCK Same as unlock wire DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to lock the doors and straight ground to unlock.
 DOORPIN BLACK/ blue In Driver's side A pillar (next to windshield)   - 
 If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 TRUNK PIN Orange At the switch on the trunk lock assembly   - 
 If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 TRUNK RELEASE Violet At release switch in dash   - 
 FACTORY ARM Gray/red DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to arm the OEM alarm. Use straight ground to disarm. If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 FACTORY DISARM Same as arm wire DKP - In harness from driver's door   - 
 Ground through a 1000-ohm resistor to arm the OEM alarm. Use straight ground to disarm. If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 BRAKESWITCH BLACK / YELLOW At switch above brake pedal   + 
 PARKLIGHTS BLACK/ green Low in driver's kickpanel   + 
 PARKLIGHTS (-) BROWN / black At light switch harness   - 
 HAND BRAKE Gray At switch on handbrake lever   - 
 HORN GREEN/ orange At steering column   - 
 If the vehicle is equipped with keyless entry, this wire can be found at the module near the steering column.
 REVERSE LIGHTS RED / yellow Low in driver's kickpanel   + 


-------------


Print Page | Close Window