wiring for a 2006 town and country

Hi guys i am doing an install of an ecilpse nav unit into a Chyrsler Voyager (down here in Australia) Town and country to you guys. I am looking for any wiring info to allow me to turn on the factory amp which is in the right rear quater panel near the rear air con unit.I have a chrysler adaptor for use in fitting an aftermarket radio to a chrysler 300 and the like but it doen not have the turn on wiring for the amp and i am now stuck and dont feel like wiring back to it.... Thanks for any help guys....

If you head over to Audiovox's website, they offer their information for free. Just set up an account and you are good to go. They show the turn on as a gray/green.


     Audio/Mobile Video                                        
     WIRE          COLOR          POLARITY          LOCATION     
     Battery          GRAY/RED          (+)          RADIO HARNESS     
     Accesory          BLACK/ PINK          (+)          RADIO HARNESS     
     Ground          BLACK          (-)          RADIO HARNESS     
     Illumination          ORANGE / BROWN          (+)          RADIO HARNESS     
     Amp Turn On          GRAY/GREEN          (+)          RADIO HARNESS     
     LF Speaker (+)          GREEN     
     LF Speaker (-)          GREEN/ BLACK     
     RF Speaker (+)          GRAY     
     RF Speaker (-)          GRAY/BLACK     
     LR Speaker (+)          GREEN/ BLACK     
     LR Speaker (-)          GREEN/ ORANGE     
     RR Speaker (+)          GRAY/BLACK     
     RR Speaker (-)          GRAY/PINK     
     Radio Security          YES

-------------
Installer, IT support, and FFL. I need less hobbies.